Epson AcuLaser C8600 Reference Manual Download Page 287

Page: 287 / 415

Troubleshooting

285

When the paper jam is cleared completely and the output path
cover (cover A) is closed, the jammed page’s print data is
automatically reprinted.

Paper Jam - Cover B (Jam B)

When paper is jammed at the fuser unit, the LCD panel displays
the

Jam B

error message.

Follow these steps to clear paper jams in the fuser unit.

1. Pull the fuser unit out gently until it stops. Be careful not to

tear the jammed paper.

Warning:
Do not insert your hand deep into the fuser unit (unit B) as
some components are sharp and may cause injury.

Summary of Contents for AcuLaser C8600
































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C8600

Reviews:

Related manuals for AcuLaser C8600

Brands by name

Popular brands

Epson AcuLaser C8600, Reference Manual

Search results

Summary of Contents for AcuLaser C8600

Reviews:

Related manuals for AcuLaser C8600

Brands by name

Popular brands