Safety Instructions
5
R4C4960 Setup Guide
Rev. C
A5 size
SAFETY.FM
5/24/01
Pass 0
R
Proof Sign-off:
ABE S.Takahashi E.Otera_______
E. Otera
_______
ABE G. Kok
_______
❏
Unplug the printer and refer servicing to a qualified service
representative under the following conditions:
❏
Adjust only those controls that are covered by the operating
instructions, as improper adjustment of other controls may
result in damage and may require repairs by a qualified
service representative.
❏
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this printer, the building installation
must be protected by a 10 or 16 amp circuit breaker.
Note for German-speaking users:
Bei Anschluss des Druckers an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10 A- oder 16 A-Sicherung abgesichert ist.
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of
your printer.
A. If liquid has entered the printer.
B.
If the printer has been exposed to rain or water.
C.
If the printer does not operate normally or exhibits a
distinct change in performance.
D. If the printer has been dropped or the cabinet damaged.
E.
When the power cord or plug is damaged or frayed.
