Epson AcuLaser C4200DN User Manual Download Page 420

Page: 420 / 475

420

Technical Specifications

❏

Your computer must support USB 2.0 in order to use USB 2.0 as

the interface to connect your computer to the printer.

❏

Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be

used as an interface.

❏

USB 2.0 can be used with Windows XP, 2000, and Server 2003

operating systems. If your operating system is Windows Me or 98,

use a USB 1.1 interface.

Ethernet interface

standard only

You can use an IEEE 802.3 100BASE-TX/10 BASE-T

straight-through shielded, twisted-pair interface cable with an

RJ45 connector.

Note:

Ethernet Interface may not be available depending on the printer model.

Options and Consumable Products

Optional paper cassette unit

:delete unnecessary inform

ation

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands