Epson AcuLaser C4200DN User Manual Download Page 310

Page: 310 / 475

310

Installing Options

12. Turn on the printer.

To confirm that the option is installed correctly, print a Status

Sheet. See "Printing a Status Sheet" on page 377.

If P5C is not listed as an installed emulation on the status sheet,

try reinstalling the module. Make sure that it is securely seated

into the ROM slot on the circuit board.

Removing the P5C ROM module

Caution:

Before you remove the ROM module, be sure to discharge any

static electricity by touching a grounded piece of metal.

Otherwise, you may damage static-sensitive components.

Warning:

Be careful when working inside the printer as some components

are sharp and may cause injury.

Perform the installation procedure in revers.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands