Epson AcuLaser C4200DN User Manual Download Page 216

Page: 216 / 475

216

Using the Control Panel

6. Press the

Start/Stop

button to exit the control panel menus.

Control Panel Menus

:delete unnecessary inform

ation/ use caution w

ith the icon and button

Press the

and

Down

buttons to scroll through the menus.

The menus and menu items appear in the order shown below.

Note:

Some menus and items appear only when a corresponding optional

device is installed or an appropriate setting has been done.

Information Menu

:confirm

the product specification and quote the inform

ation from

the sim

ilar product.

From this menu you can check the toner level and the remaining

service life of consumable products. You can also print status and

sample sheets showing the printer’s current settings, available

fonts, and a brief summary of available features.

Press the

Down

button to select an item. Press the

Enter

button to print a sheet or font sample.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands