Using the PostScript Printer Driver
195
6
6
6
6
6
6
6
6
6
6
6
6
For Macintosh
Any Macintosh computer to which the printer is connected must
be running Mac OS 9 ver. 9.1 or later, or Mac OS X ver. 10.2.x or
later. See the following table for details.
Mac OS X
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a protocol other than AppleTalk
for the network connection, you need to set
Binary
to
On
in the
PS3
Menu
on the control panel. If you use the printer with a local connection,
you cannot use binary data.
Mac OS 9
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a local connection or a protocol
other than AppleTalk for the network connection, you cannot use binary
data.
Minimum
Recommended
Computer
Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
Hard Disk
—
Memory
128 MB
Minimum
Recommended
Computer
Power PC
Hard Disk
3.1 MB free
(for driver installation)
4 MB free
(for driver installation)
Memory
4 MB
32 MB
