Epson AcuLaser C4200DN User Manual Download Page 130

Page: 130 / 475

130

Using the Printer Software with Windows

7. Right-click your printer’s icon, then click

Sharing

in the menu

that appears.

8. Select

Shared As

, type the name in the Share Name box, then

click

. Type a Comment and Password if needed.

Note:

❏

Do not use spaces or hyphens for the share name, or an error

may occur.

❏

When sharing the printer, be sure to set EPSON Status

Monitor so that the shared printer can be monitored on the print

server. See "Notice Settings" on page 117.

You need to set the client computers so that they can use the

printer on a network. See the following pages for details:

❏

"With Windows Me or 98" on page 137

❏

"With Windows XP or 2000" on page 138

Using an additional driver

When the print server’s OS is Windows XP, 2000, or Server 2003,

you can install the additional drivers on the server. The additional

drivers are for client computers that have different OS from the

server.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands