manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 26

16

Getting to Know Your Printer

Note:
You need an optional Hard Disk Drive installed in your printer in order 
to use the Reserve Job function.

HDD Form Overlay function

Enables faster printing with form overlays by allowing you to 
save the overlay data on the optional Hard Disk Drive instead of 
your computer. This feature is only available for Windows. For 
details, see “Using HDD form overlay” on page 71.

Note:
You need an optional Hard Disk Drive installed in your printer in order 
to use the HDD Form Overlay function.

Pre-defined color settings in printer driver

The printer driver offers many pre-defined settings for color 
printing, allowing you to optimize print quality for various types 
of color documents.

For more information, see “Making the print quality setting” on 
page 50 for Windows, or “Making the print quality setting” on 
page 135 for Macintosh.

Resolution Improvement Technology (RITech)

Resolution Improvement Technology (RITech) is an original 
EPSON printer technology that improves the appearance of 
printed lines, text, and graphics.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands