Replacing Consumable Products
228
EPSON AcuLaser C3800
User's Guide
Chapter 10
Replacing Consumable Products
Replacement Messages
If a consumable product reaches the end of its service life, the printer stops printing and
displays the following messages on the LCD panel or the window of EPSON Status
Monitor. When this happens, replace the depleted consumable products.
* The letters C, M, Y, or K appear in this position, indicating the color of the toner to be replaced. For
example, the message
Yellow Toner Low
means that the amount of toner remaining in the yellow imaging
cartridge is low.
Note:
Messages appear for one consumable product at a time. After replacing a consumable product,
check the LCD panel for replacement messages for other consumable products.
Imaging Cartridge
Handling precautions
Always observe the following handling precautions when replacing the consumable
products:
❏
Installing a genuine imaging cartridge is recommended. Using a non-genuine imaging
cartridge may affect print quality. Epson shall not be liable for any damages or problems
arising from the use of consumable products not manufactured or approved by Epson.
❏
When handling imaging cartridge, always place them on a clean smooth surface.
❏
If you have moved an imaging cartridge from a cool to a warm environment, wait for at
least one hour before installing it to prevent damage from condensation.
LCD Panel Message
Description
Replace Toner uuuu*
The imaging cartridge for the indicated color has reached the
end of its service life.
Replace Fuser
The fuser unit has reached the end of its service life.
Replace Transfer Unit
The transfer unit has reached the end of its service life.
