Epson AcuLaser C2000, Administrator'S Manual

Page: 21 / 272

2
Connecting to the Network
2-3
Initializing and resetting the Internal Print Server
You can initialize and reset the network settings of the Internal
Print Server using EpsonNet WinAssist or EpsonNet WebAssist,
the web-based configuration utility installed in your printer.
Note:
See the section “Changing the IP address using EpsonNet WebAssist”
on page 2-14 to open EpsonNet WebAssist.
Initialization:
You can use either method described below to initialize the
Internal Print server.
❏
Click the
Return to default
button in the Information menu
of EpsonNet WinAssist. Any network settings you have made
will be replaced by the default settings.
❏
In EpsonNet WebAssist, click Reset in the Optional menu,
then click the RETURN TO DEFAULT button. Any network
settings you have made will be replaced by the default
settings.
Reset:
In EpsonNet WebAssist, click Reset in the Optional menu, then
click the RESET button to simulate turning the power on and off.
Resetting causes any changes you have made to take effect.