240
Replacing Consumable Products
Replacement Messages
When you see the following messages on the LCD panel or the
window of the EPSON Status Monitor 3 utility, replace the
appropriate consumable products. You can continue to print for
a short time after a message appears, but EPSON recommends
early replacement to maintain print quality and extend the life of
your printer.
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example,
the message
Y Toner Low
means that the amount of remaining toner in the yellow
developer cartridge is low.
Note:
To clear these messages, select
Clear All Warnings
in Reset Menu.
Control panel
message
Description
XXXX Toner Low
*
The amount of remaining toner
in the developer cartridge(s) is
low.
Worn
Photoconductor
The photoconductor unit is
near the end of its service life.
Waste T
BoxNearfull
The waste toner collector is
nearly full of toner.
Worn
TransferUnit
The transfer unit is near the
end of its service life.
Summary of Contents for AcuLaser C1900
