manualshive.com logo in svg

Epson AcuLaser C1900, Reference Manual, Page: 202 / 396

Share
Download
Epson AcuLaser C1900 Reference Manual Download Page 202

202

Functions of the Control Panel

Using the Confidential Job Menu

Follow these steps to print or delete Confidential Job data.

1. Make sure the LCD panel displays 

Ready

 or 

Sleep

, then press 

the 

 Enter button to access the control panel menus.

2. Press the 

d 

Down button repeatedly until 

ConfidentialJobMenu

 appears on the LCD panel, then press 

the 

 Enter button.

3. Use the 

d 

Down or 

u 

Up

 

button to scroll to the appropriate 

user name, then press the 

 Enter button.

4. Enter your four-digit password by using the corresponding 

buttons, as shown below.

Note:

❏

Passwords are always four digits.

❏

Passwords consist of numbers from 1 through 4.

❏

If no print jobs have been saved with the password you entered, 

Password Error

 

appears briefly on the LCD panel then the 

printer exits the control panel menus. Confirm the password 
and try again.

5. Use the 

d 

Down or 

u 

Up

 

button to scroll to the appropriate 

job name, then press the 

 Enter button.

Summary of Contents for AcuLaser C1900













































































































































































































































































































































































































Reviews:

No comments