manualshive.com logo in svg

Epson AcuLaser C1900, Reference Manual, Page: 160 / 396

Share
Download
Epson AcuLaser C1900 Reference Manual Download Page 160

160

Setting Up Your Printer on a Network

❏

If the printer driver is installed in the client beforehand, you 
need to select either the new printer driver or the current printer 
driver. When the prompt to select the printer driver appears, 
select the printer driver according to the message. If the local 
printer driver for Windows XP/2000 is installed beforehand, 
you can select the printer driver for Windows XP/2000 as the 
current printer driver instead of the alternative driver in the 
Windows NT 4.0 server.

❏

If the additional driver for Windows XP/2000 (NT 4.0) is 
installed in the Windows XP/2000/NT 4.0 printer server, go to 
the next step.

❏

If the additional driver is not installed in the Windows NT 4.0 
printer server or the printer server’s OS is Windows Me/98/95, 
go to “Installing the printer driver from the CD-ROM” on page 
162.

6. For Windows 2000, select whether to use the printer as the 

default printer or not, then click 

OK

.

7. Make sure of the settings, then click 

Finish

.

With Windows NT 4.0

Follow these steps to set Windows NT 4.0 clients.

Summary of Contents for AcuLaser C1900













































































































































































































































































































































































































Reviews:

No comments