Chapter 3
Remote Panel Program
Working with the Remote Panel Program
Introduction
The Remote Panel Program shows information about the current status of the printer and allows you
to specify various settings such as the time until the printer enters Energy Save mode.
Note:
In order to use the Remote Panel Program, install it after installing the printer driver.
Opening the Remote Panel Program
Follow the procedure described below to start up the Remote Panel Program.
1. Double-click the file
Remote_Panel_P.exe
, which is either on the desktop or any other location
on the computer.
(The Remote_Panel_P.exe is saved at the location specified when the Remote Panel Program was
installed.)
The Remote Panel Program icon appears in the Windows notification area (right end of the
taskbar).
2. Double-click the Remote Panel Program icon that appears in the notification area.
Note:
When starting Remote Panel Program again after it has been exited, double-click the file
Remote_Panel_P.exe
.
Using the Remote Panel Program
The following functions are available from the Remote Panel Program.
AcuLaser C1600 User’s Guide
Remote Panel Program
20
