Installing Memory Modules (SMMs)
Your computer comes with 2MB, 4MB, or 8MB of memory on
memory modules-also called SIMMs (single inline memory
modules). By installing additional SIMMs, you can increase the
amount of memory in your computer up to 16MB. There are
four SIMM sockets on the main system board, and each can
contain one SIMM. You can install 1MB and 4MB SIMMs.
The following table shows the possible SIMM configurations.
Do not install memory in any other configuration. The label on
the system board for each SIMM socket
(RAM1
through RAM4)
identifies the bank of sockets where you should install SIMMs.
(An x indicates that no SIMM is installed in that bank.)
Before you install SIMMs, review the following guidelines to
ensure that they will work properly:
Use only tin-plated, 30-pin, S-bit or 9-bit, fast-page mode
SIMMs that operate at an access speed of 70ns
(nanoseconds) or faster. Be sure all the SIMMs operate at
the same speed.
Use the correct SIMM configuration to add the amount of
memory you want. See the table above.
Your SIMM sockets may not look exactly like the ones in
the illustrations. If you are not sure how to install SIMMs,
contact the EPSON Connection.
3-10
Installing and Removing Options
