Epson ActionTower 2000 User Manual Download Page 3

Page: 3 / 131

Update

This update revises the

Read This First

booklet that came with your

computer. In addition to the multimedia software listed in that

booklet, your computer also comes with these multimedia programs:

Interplay

Battle Chess

game software on CD

Technical support:

(714) 553-6678

Fax:

(714) 252-2820

BBS:

(714) 252-2822

Paramount Interactive Lenny’s MusicToons

T M

game software

on CD
Technical support:

(415) 813-8030

Fax:

(415) 813-8045

This update tells you how to use Microsoft

Windows

T M

to install

these programs on your computer’s hard disk drive and how to
create buttons for them in the EPSON

FocalPoint

Windows

environment program.

See

your

Read This First

booklet, your

Windows documentation, and the on-line help utilities for in-depth
information on using Windows and FocalPoint.

For information on using Battle Chess and Lenny’s MusicToons,

see the program’s README file or on-line help utility, or contact

the manufacturer at the numbers listed above.

lnstalling BattIe Chess

To install Battle Chess using Windows, follow these steps:

Start the Windows Program Manager.

Insert the Battle Chess CD into the CD-ROM drive. Then wait
for the green light on the CD-ROM drive to light up.

From the File menu, select

Run.

Summary of Contents for ActionTower 2000




































































































































Search results

Summary of Contents for ActionTower 2000

Reviews:

Related manuals for ActionTower 2000

Brands by name

Popular brands

Epson ActionTower 2000, User Manual

Search results

Summary of Contents for ActionTower 2000

Reviews:

Related manuals for ActionTower 2000

Brands by name

Popular brands