Cleaning the Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year.
1. Make sure the printer is turned off. Then remove the paper
guide, pull tractor unit, and any installed options.
2. Use a soft brush to carefully clear away all dust and dirt.
3.
If the outer case or paper guide is dirty or dusty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover in place to prevent water from
getting inside the printer.
CAUTION:
l
Never use alcohols or thinners to clean the printer;
these chemicals can damage the components as well
as the case.
l
Be careful not to get water on the printer mechanism
or electronic components.
l
Do not use a hard or abrasive brush.
l
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact
your dealer or a qualified service person if lubrication
is needed.
5-2
Maintenance
and
Transportation
Summary of Contents for ActionPrinter 3000
Page 1: ......
Page 2: ......
Page 114: ...Character Tables PC 860 Portugal PC 863 Canada French A 4 Appendix ...
Page 115: ...Character Tables PC 865 Norway Appendix A 5 ...
