manualshive.com logo in svg

Epson ActionPrinter 2250, User Manual

Share
Download
Epson ActionPrinter 2250 User Manual Download Page 11

Introduction

Your new Epson

®

 printer is an advanced 9-pin dot matrix printer

that combines high performance with a wide range of features.

Features

These features give your Epson printer outstanding value:

Fast printing speed. You can print up to 240 characters per

second in 12 cpi draft mode.
Easy paper handling. The built-in paper cassette holds up to 50

single sheets of paper. You can also install the push tractor to

print on continuous paper, multi-part forms, and labels. Also

you can switch between single-sheet and continuous printing

without removing either paper supply.
Compatibility. The printer supports the Epson ESC/P

®

commands widely used in software programs written for

other Epson LX printers.
Two printer positions. You can set the printer upright or flat,

whichever you prefer.
A range of popular fonts. You can choose from two draft fonts

and two near letter quality fonts for professional results.
Unique control-panel design. The sleek, two-button panel

makes it easy to customize the printer’s default settings.
No adjustment necessary for paper thickness. You do not need to

adjust a paper thickness lever when you use thick paper.

In some locations, the push tractor is an option (part number

C80026*) .

Introduction 1

Summary of Contents for ActionPrinter 2250











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands