Epson ActionPC 5500, User Manual

Page: 43 / 147

When you select one of these icons from the Default window, a
prompt asks you whether or not to load the selected set of
values. Select Yes to load the selected values or No to keep
your current values.
Exiting SETUP
To leave SETUP, press
Esc
or select the button in the upper left
corner of the main SETUP screen. You see the following choices:
Save changes and Exit
Do not save changes and Exit
Continue.
If you do not want to save the changes you made during this
SETUP session, select Do not save changes and Exit.
If you want to return to SETUP to make more changes, select
Continue.
Installing System Drivers
If you are using Windows 95, you don’t need any additional
drivers—they are included with the operating system. If you
have Windows 3.1, your system has the drivers already
installed. The only time you might need to re-install drivers
from the drivers diskettes is if you are using Windows 3.1 and
have to reconfigure your hard disk drive or if you use an
operating system other than Windows. The following sections
describe how to install these drivers.
Running SETUP and Installing Drivers
2-17