Epson ActionPC 5500, User Manual

Page: 31 / 147

The following table describes Standard options.
Standard Options
Option Settings
Description
Date
day, month and date, Sets the time and date for the
Time
y e a r
computer’s real-time clock; once
hh:mm:ss **
set,
you should not need to
change them, unless you adjust
the time for daylight savings or a
different time zone (the computer
changes the date for leap years)
Floppy A Not Installed
Defines the type of diskette drive
360 KB
5¼” installed as drive A
1.2 MB 5¼”
720
KB 3½"
1.44 MB 3½”*
2.88 MB 3½”
Floppy B Not Installed *
Defines the type of diskette drive
360 KB
5¼” installed as drive B
1.2 MB
5¼”
720
KB 3½”
1.44 MB 3½”
2.88 MB 3½”
Master Cyl (cylinders)
Displays the parameters read by
Disk Hd (heads)
auto detection for the master
WP (write
hard disk drive; you can override
precompensation
by selecting a different set of
cylinder)
parameters or by selecting
LZ (head landing zone)
type 47, which lets you type in
Sec (sectors)
your own parameters
Size (storage capacity)
Slave Cyl (cylinders) Displays the parameters read by
Disk Hd (heads) auto detection for the slave hard
WP (write
disk drive; you can override by
precompensation selecting a different set of
cylinder) parameters or by selecting
LZ (head landing zone)
type 47, which allows you to type
Sec (sectors) in your own parameters
Size (storage capacity)
* Default setting
** Set time or date by highlighting an element and clicking the + (plus) to
increase the value or the - (minus) to decrease the value.
Running SETUP and Installing Drivers 2-5