Your SIMM sockets may not look exactly like the ones in
the illustrations. If you’re not sure how to install SIMMs,
contact the EPSON Connection and ask for assistance.
Inserting SIMMs
Follow these steps to install SIMMs:
1.
Refer to the illustration on page 3-5 to locate the SIMM
sockets.
2.
Remove any option cards that may be blocking your access
to the SIMM sockets. (See page 3-17 for instructions.)
3.
Position the first SIMM at an angle over the first empty
socket in the bank you are filling, as shown below. The
components on the SIMM should face the computer’s
power supply.
Installing and Removing Options
3 - 1 1
