Epson ActionNote 866C, User Manual

Page: 47 / 139

Using Video Drivers and Utilities
Your system includes high-resolution video display drivers for
Windows installed on your hard disk drive. You can use these
drivers to display in resolutions up to 1024 x 768 in 16 colors on
an external monitor. To select these drivers, you can use the
Windows Setup utility or the ChipsCPL utility in the Windows
Control Panel.
ChipsCPL allows you to select the resolution (screen size),
color, and font size for your display. To run the utility, select its
icon in the Windows Control Panel. You can also use ChipsCPL
to switch your display between the LCD screen and an external
monitor, select a cursor size, and enable backlight and display
timeout periods.
If you select a higher resolution for your LCD screen, your
display will be larger than the screen itself. You will have to
scroll up and down and from side to side to see the entire
display.
Note
Your ActionNote is configured to display in standard VGA
resolution on your LCD or an external monitor. You can
toggle between displaying on the LCD, the CRT, or on both
screens simultaneously by pressing
Fn F10. You
can also set
the default video mode by using the Setup program; see
Chapter 1 for more information.
To check on the availability of drivers for non-Windows
applications, call the EPSON Connection or access the Epson
America Forum on CompuServe.
2-12 Using Your Computer