Changing the Password
If
you enable the Password Checking Opt ion on
the ADVANCED CMOS SETUP screen, you use the
CHANGE PASSWORD option to specify the password.
Caution
If you do set a password, be sure it is easy to remember. If
you forget your password, you will have to call the Epson
Connection for assistance.
When you select the
CHANGE
PASSWORD
option, you see the
following prompt:
Enter CURRENT
Password :
Type the current password. (When you enable a password for
the first time, the current password is AMI.) You see the
following prompt:
Enter NEW Password :
Type your password using up to six characters. To protect your
password, the screen does not display what you type. After
typing the password, press . Then you see the following
prompt:
Re-Enter NEW Password :
Type the same password again and press . (This confirms
your password for the system.) The program displays the
following message:
NEW Password Installed
Press
to return to the main menu screen. Highlight
WRITE TO CMOS AND EXIT
and press
.
5-12 Running Setup
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
