Using
the Embedded
Numeric Keypad
The embedded numeric keypad allows you to enter numeric
characters from the keyboard when the Num Lock function is
on. The numeric keypad is shown below:
Press
to turn Num Lock (and its LED) on and off. Then
press the key to enter the numeric character printed on the
front of the key. You can press
plus the key to enter the
alphabetic character on the key; press
plus the
key to enter the alphabetic character in uppercase.
When Num Lock is off, you can generate the numeric character
by pressing
plus the key.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. Many programs provide a command you can use
to cancel or even undo an operation. If you have entered an
MS-DOS command that you want to stop, try one of the
following commands:
Hold down
and press
Hold down
and press
.
Using Your Computer
2-9
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
