11. At the installation menu, select Save
changes.
12. At the prompt, enter a name that identifies this driver; it’s
a good idea to include the driver’s resolution, 100x60. The
default driver name assigned by the program is 123.SET.
13. Exit the Lotus Install program.
To start Lotus with the new driver resolution, you include the
name of the driver with the Lotus prompt. For example, if you
named your driver l00x60SET, you would type the following
and press
133 100X60
Microsoft Windows, Version 3.0
The Microsoft Windows driver supports a resolution of
800 x 600 with 16 colors.
Note
Even though this driver is specific to Windows 3.0, you can
use it with Windows version 3.1. Check with the Epson
Connection for the availability of the Windows 3.1 driver.
To install the driver, follow these steps:
1. Log onto the Windows directory on your hard disk.
2. At the command prompt, type
SETUP
and press
3.
Atthe System
information screen, select Display
and
press
7-4
Using the VGA Utilities
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
