Epson ActionLaser Plus, User Manual

Page: 82 / 239

SelecType Options
Since the character table setting affects only half of the character
table, you can still print text if you have selected the Extended
Graphics set. Also, the ESC 4 command can be used to turn on the
italic mode even if you have selected the Epson Extended Graphics
character table.
The printouts below show which characters are printed in each
table. For a chart showing the characters and their hexadecimal and
decimal codes, see Appendix A.
Italics
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH
IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq
rstuvwxyz{|}~
TOP OF FORM = 03*
00 through
12
This option sets the top margin in 1/12-inch increments within the
printable area. The printable area of each page begins 1/4 inch from
the top of the page. This option adds to that 1/4 inch margin. If 00 is
set, for example, there is a 1/4 inch top margin. If 12 is set, there is a
1-1/4 inch top margin.
3-28
Using the Printer