Epson ActionLaser Plus, User Manual

Page: 172 / 239

Error Messages
This chapter discusses problems you may encounter with your
printer and their likely solutions.
The first section of this chapter describes error messages and provides
possible solutions. The remaining sections are designed to help you
solve problems that may occur while you are using the printer.
When an error occurs, the error light comes on and a message
appears in the display on the control panel. The message tells you
what may be wrong and, in some cases, indicates the actions you
should take to correct the problem.
This section contains a list of error messages you may encounter
while printing. Each error message is followed by the steps you
need to take to correct the problem.
Certain problems require service by an Epson Customer Care
Center. Call the Epson Consumer Information Center at
1-800-922-8911 for a referral to a Customer Care Center.
Notes:
l
When a problem has been corrected, you may need to press
the
ON LINE
button to resume printing.
l
Certain problems require that you press the
CONTINUE/RESET
button to continue printing. However, when the
AUTO CONT
SelecType option is set to
ON,
the printer automatically clears
the
error and resumes printing for the following error messages:
PS CHANGE
ERROR 21 ERROR 40
ERROR 20 ERROR 22
When the
AUTO CONT
SelecType option is set to
ON,
your
printer resumes printing even though the problem may not
have been fixed. This may cause a problem with your printed
output.
7-2 Troubleshooting