Epson ActionLaser Plus, User Manual

Page: 142 / 239

Maintenance Messages
CAUTION:
If you regularly print high density (more than
20 percent page density) graphics, you need to replace the
drum unit more frequently. You must keep track of the
number of toner cartridges you have used, and replace the
drum unit and drum replacement cartridge at the same
time you install the eighth toner cartridge. Do not wait for
the CHANGE DRUM message to appear on the control
panel. Overuse of the drum unit results in a reduction of
print quality and increased maintenance requirements.
19. There are certain printer components inside the printer you
must clean each time you replace the toner cartridge. See the
Routine Printer Cleaning section on page 6-19. (You need to
locate some isopropyl alcohol for cleaning purposes before
cleaning the printer.)
Note: Because it is necessary to turn off your printer before
cleaning it, you may want to finish your print job as soon as
you replace the toner cartridge and cleaning pad. If so, simply
close the printer cover and press the
ON LINE
button. Be sure
to clean your printer as soon as you have finished printing.
Change drum message
The CHANGE DRUM message indicates that you need to do the
following:
l
Replace the drum unit
l
Replace the drum replacement cartridge
• Perform routine cleaning procedures, which take only a few
moments.
6-12 Maintenance and Transportation