Epson Action Laser Action Laser, User Manual, Page: 149 / 219

Transporting Your Printer
If you need to move the printer a short distance, such as from one
room to another, make sure
that
you keep the printer level.
If you are shipping the printer, you need to repackage the printer
and its accessories. Read and carefully follow
the
instructions below.
Also make sure that the shipper takes adequate precautions to avoid
damaging the printer.
CAUTION: Do
not ship
the
printer with the drum unit
and developer unit installed in the printer. Also, do not
vacuum toner out of the developer unit.
Packing for transportation
To pack the printer you need all the original packing materials that
came with
the
printer and some packing tape. You also need two
large plastic bags for packing the drum unit and developer unit, to
contain any toner displaced during shipping.
Prepare the printer for transportation by following
the
steps below:
1.
2.
2.
3.
4.
4.
5.
6.
Be sure that your printer and computer are turned off.
Remove the power cord and the cable connecting your printer
and computer.
If there is a cartridge in the cartridge slot, remove it.
Remove
any
paper still in the paper cassette. Then remove the
paper cassette and the face-up output tray from the printer.
Repackage
each
tray in its original packing material.
Open
the
printer using the latch at the front.
Lift out
the
basket and place it on a flat surface.
Maintenance and Transportation 6-33