1-6
Installing the Software
L
Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi
R4C4410
Rev. C
A5 size
INSTALL.FM
2/14/00
Pass 3
c
Caution:
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable and connector may be damaged.
4.
Turn the camera’s dial switch to
and turn on
your computer.
Note:
Make sure AppleTalk is inactive for the port that you
use to connect your camera. Otherwise, the computer
may not recognize your camera.
c
Caution:
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Installing Software for Windows Users
When you use the USB cable to connect your camera
and computer, install the USB driver first and then
EPSON Photo!3. When you use the serial cable, you
install only EPSON Photo!3.
Note:
Be sure to follow these steps to use the USB connection.
Installing the USB driver
When your camera is connected to a computer with
the USB cable, follow these steps to install the USB
driver.
1.
Turn on the computer, and turn the camera’s dial
switch to
.
