Epson 835p - PowerLite XGA LCD Projector, User Manual

Page: 64 / 210

64
Presenting Through a Wireless Network
4. If your network card supports an SSID or ESSID name (see
page 66), highlight the
ESSID
text box, press
Enter
, and enter a
name. When you’re done, press
Enter
. Note that the ESSID is
case-sensitive (if you enter the name in uppercase on the
projector, you must type it the same way on the computer
connecting to the projector).
5. If you want to create a password for remote access to the
projector, highlight the
Password for WEB control
checkbox,
press
Enter
, and enter a password of up to 8 alphanumeric
characters. When you’re done, press
Enter
.
6. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, turn
Projector
keyword
on. Then when you want to connect to the projector, it
displays a randomized four-digit number or “keyword” on the
screen. When prompted by NS Connection, you can enter the
keyword on your computer to connect (see page 86).
7. When you’re done making these settings, highlight the
OK
button
at the top of the screen (you can either press the
Esc
button on
the remote control or use the pointer button to highlight it),
then press
Enter
. Highlight the
OK
button again and press
Enter
to return to the main EasyMP Network Screen.
Now you’re ready to set up your computer for wireless projecting.
Go to “Configuring the Network Settings for Windows” below, or
“Setting Up Your Macintosh for Ad Hoc Mode” on page 67.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your notebook’s or PC’s network card match the settings you
entered for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
Start > Control Panel > Network
and Internet Connections
. Then click the
Network
Connections
icon.
note
The projector keyword
changes each time you turn
the projector off and then on
again, or remove and
reinsert the 802.11g card.
Check the keyword on the
EasyMP Network screen
whenever you start EasyMP
and enter that keyword on
your computer. You can’t
connect using a previous
keyword.
It is recommended that the
keyword setting is changed
periodically.
note
On some Windows systems,
you can right-click
My Network Places
or
Network Neighborhood
on the desktop and select
Properties
.
Settings may vary,
depending on your wireless
network adapter. See the
documentation for your
adapter for more
information.