Epson 835p - PowerLite XGA LCD Projector, User Manual

Page: 82 / 210

82
Presenting Through a Wireless Network
Adding LEAP Authentication
When you click the
Security
button on the Network screen, you see
this screen:
1. Highlight
LEAP
, then press
Enter
.
2. Enter the user name and password that match the settings on your
authentication server:
■ Highlight the
User name
text box and press
Enter
. The box
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the
pointer button to the right to move to the
next character position. When done typing the user name,
press
Enter
.
■ Highlight the
Password
text box and press
Enter
. The box
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the
pointer button to the right to move to the
next character position. When done typing the password,
press
Enter
.
3. When you’re done making settings, highlight the
OK
button at
the top of the screen and press
Enter
.
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the
Num
button again to
exit numeric keypad mode.