Epson 830p - PowerLite XGA LCD Projector, User Manual

Page: 38 / 148

38
Using the Remote Control
Zooming Part of Your Image
You can zoom in on a portion of the image using the
E-Zoom
buttons
on the remote control.
1. Press the
E-Zoom
button on the remote control.
You see a cross hair indicating the center of the zoom-in area.
2. Use the pointer button to position the cross hair on the part
of the image you want to enlarge.
3. Continue pressing the
E-Zoom
button to enlarge the selected
area up to 4 times.
4. While the image is enlarged, you can:
■
Use the pointer button to move around the screen.
■
Press the
E-Zoom
button to zoom out.
5. When done, press the
E
SC
button to return the image to its
original size.
Displaying a Picture-in-Picture Video
If you’re displaying an image from equipment connected to
the
Computer
port(s), you can open up a smaller picture-in-picture
window on the screen. This window can display video from
equipment connected to either the
Video
or
S-Video
port.
Setting Up the Picture-in-Picture Image
Before starting, make sure the computer or video equipment for your
main image is connected to the
Computer
port(s), and the video
equipment for the picture-in-picture window is connected to the
Video
or
S-Video
port. Then select the corresponding video setting:
1. Press the
Menu
button on the remote control and enter the
Setting
menu.
2. Highlight
P in P Options
and press
Enter
, then use the pointer
button to select
Subscreen Image
and press
Enter
. Use the
pointer to choose
Video
or
S-Video
, then press
Enter
.
3. Press
Menu
to exit the menu system.
note
The Picture-in-Picture
function does not work for
RGB video images.