Epson 830p - PowerLite XGA LCD Projector, User Manual

Page: 96 / 148

96
Maintaining the Projector
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power
cord.
■
To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
■
To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.
Cleaning the Air Filters and Vents
Clean the air filters and air intake vents after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.
1. Turn off the projector and unplug the power cord.
2. To clean the intake vents, use a small vacuum cleaner designed for
computers and other office equipment. If you don’t have one,
gently clean the vents with a soft brush (such as an artist’s
paintbrush).
3. If the dirt is difficult to remove or a filter is broken, replace the
filters as described on the next page. Contact your dealer or call
Epson at (800) 873-7766 in the United States to obtain new ones.
In Canada, please call (800) 463-7766 for dealer referral.
caution
Do not use wax, alcohol,
benzene, thinner, or other
chemical detergents. These
can damage the case.
note
To order replacement air
filters, request part number
V13H134A07. See page 13
for ordering information.