manualshive.com logo in svg

Epson 8300NL - PowerLite XGA LCD Projector, User Manual

Share
Download
Epson 8300NL - PowerLite XGA LCD Projector User Manual Download Page 30

30

Setting Up the Projector

Connecting External Speakers

To connect speakers to the projector, follow these steps:

1. Obtain the appropriate cable to connect your speakers. 

Speaker systems come with a variety of jacks. Depending on your 
system, you may be able to use a stereo mini-jack cable (such as 
the one included with the projector), or you may have to purchase 
a special cable or use an adapter to connect to your speakers.

2. Connect the stereo mini-jack end of the audio cable to the 

Audio 

Out

 port on the projector. 

  

3. Connect the other end of the cable to your speaker system. You 

may need to use an adapter to make the connection. 

The projector’s internal speaker system is disabled while sound is 
output to the external speakers. 

Summary of Contents for 8300NL - PowerLite XGA LCD Projector











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands