Epson 7900p - PowerLite XGA LCD Projector, User Manual

Page: 113 / 146

Solving Problems
113
The Power light is flashing orange and you cannot turn
on the projector.
The lamp is cooling down. Wait until the light turns off and then
press the
Power
button to turn on the projector.
The Power light does not come on.
Make sure the power cord is connected securely both at the power
outlet and the projector. If you have just replaced the lamp, make sure
the cover is securely fastened.
Viewing Lamp Usage and Other Information
Use the About menu to view information about image source, the
display settings of your computer, and the number of hours the lamp
has been used.
1. Press the
Menu
button, then highlight the
About
menu and press
Enter
.
You see the lamp usage hours and various input signal settings on
the right:
The lamp typically lasts from 2000 to 3000 hours, depending on
the selected Brightness Control setting (see page 68). If the
number shown is close to that, make sure you have a spare lamp
handy. If you’ve installed a new lamp, be sure to reset the lamp
timer (see page 107).
note
The information displayed
depends on the input signal
currently selected.
Lamp usage