Epson 7850p - PowerLite XGA LCD Projector, User Manual

Page: 134 / 224

134
Using the Projector’s Menus
Choosing When to Display the Image
After your image is saved, you can set it up as the startup screen, or the
screen you see when there’s no signal or when you press the
A/V Mute
button (see page 38).
1. Press the
Menu
button to display the menu screen (if not already
displayed).
2. To display your image as the startup screen, highlight the
Advanced1
menu, then press
Enter
. Select
Startup Screen
,
highlight
ON
, then press
Enter
.
To display your image on the No-Signal or A/V Mute screen,
continue with the following steps.
3. Highlight the
Setting
menu, then press
Enter
.
4. Select the screen(s) on which you want your image to appear:
■
Highlight
No-Signal Msg.
if you want to display your image
(instead of a blank screen) when there is no video signal
incoming from the currently selected source.
■
Highlight
A/V Mute
if you want your image to appear when
you press the
A/V Mute
button.
5. Select
Logo
, then press
Enter
. This sets your image as the screen
to be displayed. (Or select
Blue
if you prefer to display a blue
screen instead.)
6. When you’re finished, press
E
SC
to exit.