Epson 7800p - PowerLite XGA LCD Projector, User Manual

Page: 86 / 146

78
Managing the Projector from a Remote Computer
Connecting and Configuring the
Projector
Before using the Easy Management software to manage your
projector(s), you have to connect each projector you want to monitor
to your network and configure it with an appropriate IP address.
1. Connect the projector to your network using a commercially
available 100baseTX or 10baseT network cable.
Connect the cable to the Ethernet port on the projector as shown.
2. Turn on the projector (see page 28).
3. Press the
Menu
button on the remote control and select
Network
from the
Advanced2
menu.
4. If your network assigns addresses automatically, turn on
DHCP
.
Ethernet port
Brightness Control Brightness Control High High Low Low
: Video Video
Audio Audio
Setting Setting
User's Logo User's Logo
Advanced1 Advanced1
About About
Reset All Reset All
Projector ID Projector ID
Network Network
Reset Reset
Execute Execute
: 1 : 1
[Menu]: Exit [Menu]: Exit [ ]: Enter [ ]: Enter [ ]: Select [ ]: Select
Effect Effect
Advanced2 Advanced2
COM Port COM Port
BNC Sync Termination BNC Sync Termination
:
ON ON OFF OFF
:
Set Set
Set Set
RS-232C RS-232C USB USB
Auto setup Auto setup
ON ON OFF OFF
:
Select Network