Epson 7800 - Stylus Pro Color Inkjet Printer Printer Manual Download Page 50

Page: 50 / 176

1-50

Setting Up the Printer

12. Close the installer, then remove the CD-ROM. Go to the next section

to update the printer firmware, if necessary.

Updating Your Printer Firmware

To keep your printer features and functionality up to date, you should check
for a newer version of firmware on the Epson support site and update your
printer, if necessary.

Downloading the Firmware

1. Navigate to http://support.epson.com in your browser.

2. Choose your printer.

3. Click

Drivers and Downloads

to find the newest firmware.

4. Choose the version for Macintosh or Windows and follow the

instructions on the screen, then continue with the instructions in the
next section to upgrade the firmware.

7800-9800Guide.book Page 50 Monday, April 10, 2006 11:59 AM

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

















































































































































































Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews:

Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual, Page: 50 / 176

Search results

Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer

Reviews: