5-126
126
|
Maintaining and Transporting the Printer
7. When cleaning is finished and the
Pause light stops flashing, print the
nozzle check again to confirm that the head is clean.
For effective cleaning, always run a nozzle check between cycles.
If the pattern is still missing segments or has deflections after a power
cleaning cycle, turn the printer off and leave it overnight, then clean the
print head again the following morning with regular cleaning cycles. If
you still see no improvement, contact Epson for assistance.
Aligning the Print Head
Aligning the print head is the most important thing you can do to ensure the
best print quality. If banding appears on your prints, if they look grainy or
blurry, or if you see misregistration or “ghosting,” you need to align the print
head.
Although you can align the print head using the printer utility software, it’s
also easy to align from the printer’s control panel. This will do the most
thorough job in the shortest time, and it’s all automatic.
If you haven’t already done so, it’s a good idea to run a nozzle check before
aligning the print head (page 124). This ensures that the print head
alignment patterns print correctly.
Follow these steps to align the print head using the control panel:
1. Make sure the printer is turned on. Then load Epson Enhanced Matte
paper or the paper that came with the printer.
2. Press the
Menu
button.
3. Press the
d
button until
HEAD ALIGNMENT
is highlighted, then press
Menu
.
PAPER THICKNESS
is highlighted.
4. Press
Menu
. The
STANDARD
setting is selected by default. This is the
correct thickness setting for most Epson papers.
5. Press to save the setting.
6. Press
l
, then press
d
to highlight
ALIGNMENT
.
Note:
You must use at
least a 10
×
eye loupe to
examine the nozzle check
pattern for deflected
nozzles.
Tip:
To properly align the
print head, you can also
use Epson Doubleweight
Matte Paper or Premium
Luster Photo Paper.
7800-9800Guide.book Page 126 Monday, April 10, 2006 11:59 AM
Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer
Page 4: ...4 7800 9800Guide book Page 4 Monday April 10 2006 11 59 AM ...
Page 16: ...16 16 Introduction 7800 9800Guide book Page 16 Monday April 10 2006 11 59 AM ...
Page 54: ...1 54 54 Setting Up the Printer 7800 9800Guide book Page 54 Monday April 10 2006 11 59 AM ...
Page 176: ... 176 176 Index 7800 9800Guide book Page 176 Monday April 10 2006 11 59 AM ...
