Epson 755c - PowerLite XGA LCD Projector, User Manual

Page: 130 / 198

130
Managing Projectors
You see the following screen:
6. For Mail Notification Settings, select
ON
and press
Enter
.
7. Highlight the
IP address of SMTP server
box and press
Enter
.
The box turns yellow to indicate you are in input mode. You can
enter numbers between 0 and 255. However, you cannot use the
following IP addresses: 255.255.255.255, 224.0.0.0, or 127.x.x.x
(where x is a number between 0 and 255).
8. Highlight the
Port Number
box and press
Enter
. Then enter the
SMTP server port number. The default value is 25, but you can
enter numbers between 1 and 65535.
9. Highlight the
Destination address 1
box and press
Enter
. Enter
the e-mail address for the first computer that you want to receive
e-mail alerts. You can enter a maximum of 53 single-byte
alphanumeric characters.
Use the pointer button on the remote control to enter letters.
Press the top of the button to scroll through capital letters, and
the bottom of the button to scroll through lowercase letters. You
will also see punctuation marks, such as a period (.) and symbols,
such as @. When you see the letter or symbol you want, press
Enter
. Then press the right side of the button to move to the next
position. To correct a mistake, press the left side of the button to
return to the previous position.
note
To enter numbers with the
remote control, hold the
Num
button and use the
numeric keypad. Press the
Num
button again to exit
numeric keypad mode.