manualshive.com logo in svg

Epson 745c - PowerLite XGA LCD Projector, User Manual

The Epson 745c - PowerLite XGA LCD Projector offers remarkable image quality and superb clarity. Discover the full potential of this exceptional device with our User Manual available for download, free of charge, from manualshive.com. Unlock its advanced features and optimize your projection experience.

Share
Download
background image

Connecting to Computers, Cameras, and Other Equipment

41

Connecting to Video Equipment

 

You can connect several video sources to the projector at the same 
time. Before starting, look at your video equipment to determine its 
available video output connections: 

■

If your video player has a yellow RCA-style video output 
connector, see “Connecting a Composite Video Source” on 
page 42.

■

If your video player has an S-Video connector, see “Connecting 
an S-Video Source” on page 43.

■

If your video player has a component video port (three connectors 
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a 
Component Video Source” on page 44.

■

If your video player has an RGB video port (either a single 
connector for a VGA-style monitor cable or three connectors 
labeled R/G/B), see “Connecting an RGB Video Source” on 
page 45.

After connecting video cables, you may also want to connect an audio 
cable to play sound through the projector; see page 47.

RCA connector 

(composite video)

S-Video 

connector 

VGA connector 

(RGB video)

Banff-Toronto User's Guide.book  Page 41  Thursday, January 20, 2005  5:00 PM

Summary of Contents for 745c - PowerLite XGA LCD Projector





































































































































































































Reviews:

No comments

Related manuals for 745c - PowerLite XGA LCD Projector

Panasonic TH-80BF1U Operating Instructions Manual preview
TH-80BF1U
Brand: Panasonic Pages: 41
GEONAUTE Dual Belt Bluetooth Smart / ANT+ Quick Start Manual preview
Dual Belt Bluetooth Smart / ANT+
Brand: GEONAUTE Pages: 5
Rydeen BM354S Owner'S Manual preview
BM354S
Brand: Rydeen Pages: 5
Gator GRV127KT User Manual preview
GRV127KT
Brand: Gator Pages: 12
IAdea XDS-151 User Manual preview
XDS-151
Brand: IAdea Pages: 12
Safety 1st VUP1048B User Manual preview
VUP1048B
Brand: Safety 1st Pages: 7
NEC MultiSync V554Q-R User Manual preview
MultiSync V554Q-R
Brand: NEC Pages: 76
Westinghouse WC27PX9019 User Manual preview
WC27PX9019
Brand: Westinghouse Pages: 12
ViewSonic G90f (Finnish) Käyttöopas preview
G90f
Brand: ViewSonic Pages: 19
ViewSonic ViewPanel VP150m User Manual preview
ViewPanel VP150m
Brand: ViewSonic Pages: 22
Advantech ProFlat IDP-31215W User Manual preview
ProFlat IDP-31215W
Brand: Advantech Pages: 15
FUNAI F42PDME Service Manual preview
F42PDME
Brand: FUNAI Pages: 90
Polar Electro S725 User Manual preview
S725
Brand: Polar Electro Pages: 122
Panasonic TH-98LQ70U Operating Instructions Manual preview
TH-98LQ70U
Brand: Panasonic Pages: 82
Panasonic TH-65PF10WK Service Manual preview
TH-65PF10WK
Brand: Panasonic Pages: 191
Lenovo 0566-AB1 User Manual preview
0566-AB1
Brand: Lenovo Pages: 27
Lenovo 0560-HB1 User Manual preview
0560-HB1
Brand: Lenovo Pages: 29
Lenovo 2120-HB1 User Manual preview
2120-HB1
Brand: Lenovo Pages: 32

Brands by name

Popular brands

Load more brands