manualshive.com logo in svg

Epson 745c - PowerLite XGA LCD Projector, User Manual

The Epson 745c - PowerLite XGA LCD Projector offers remarkable image quality and superb clarity. Discover the full potential of this exceptional device with our User Manual available for download, free of charge, from manualshive.com. Unlock its advanced features and optimize your projection experience.

Share
Download
background image

110

Fine-Tuning the Projector

Adjusting the Image 

You can use the Image menu to adjust the brightness, sharpness, color, 
tint, and contrast. 

1. Press the 

Menu

 button on the projector or remote control and 

select the 

Image

 menu. You see the Image menu screen. 

2. Use the 

pointer button to highlight the desired option, then 

adjust it as needed:

■

Color Mode

Lets you quickly adjust the color and brightness for various 
environments. Use either the remote control or the 

Color 

Mode

 setting in the Image menu. You can save a different 

setting for each source. Select from these settings:

Dynamic:

 For increased brightness in bright rooms (the 

default for non-computer display).

Presentation:

 For computer presentations (the default when 

projecting from a computer with analog video).

Theatre:

 For optimizing movie images with increased 

contrast. 

Living Room:

 For increased brightness when playing video 

games or watching TV in a bright room.

sRGB:

 For matching the color palette of standard sRGB 

computer displays.

Blackboard

: For projecting accurate colors on a green 

chalkboard (adjusts the white point).

Banff-Toronto User's Guide.book  Page 110  Thursday, January 20, 2005  5:00 PM

Summary of Contents for 745c - PowerLite XGA LCD Projector





































































































































































































Reviews:

No comments

Related manuals for 745c - PowerLite XGA LCD Projector

Baby Control Digital BC-200 User Manual preview
BC-200
Brand: Baby Control Digital Pages: 12
Garmin HRM-Run Steps To Replace The Battery preview
HRM-Run
Brand: Garmin Pages: 3
Rae MultiRAE Quick Start Manual preview
MultiRAE
Brand: Rae Pages: 4
Philips BRILLIANCE 273P3 User Manual preview
BRILLIANCE 273P3
Brand: Philips Pages: 55
Daktronics Galaxy AE-3010 Manual preview
Galaxy AE-3010
Brand: Daktronics Pages: 79
NEC XG85-XG135LC - 1 Manual preview
XG85-XG135LC - 1
Brand: NEC Pages: 136
I-Tech Sunlight Readable LCD Monitor Datasheet preview
Sunlight Readable LCD Monitor
Brand: I-Tech Pages: 1
Fujitsu Siemens Computers SCALEOVIEW S17-2 Operating Manual preview
SCALEOVIEW S17-2
Brand: Fujitsu Siemens Computers Pages: 36
JL Audio MediaMaster I05 Owner'S Manual preview
MediaMaster I05
Brand: JL Audio Pages: 43
smartheart Premium Digital 01-561 Instruction Manual preview
Premium Digital 01-561
Brand: smartheart Pages: 68
max mobility PushTracker User Manual preview
PushTracker
Brand: max mobility Pages: 12
REXROTH IndraControl VDP 16.3 Operating Instructions Manual preview
IndraControl VDP 16.3
Brand: REXROTH Pages: 60
BodyTrace BT104 User Manual preview
BT104
Brand: BodyTrace Pages: 16
Alecto IVM-180 User Manual preview
IVM-180
Brand: Alecto Pages: 20
Eizo DuraVision FDF2303W User Manual preview
DuraVision FDF2303W
Brand: Eizo Pages: 73
Sansui HDPDP4200 Owner'S Manual preview
HDPDP4200
Brand: Sansui Pages: 40
Fujitsu B22W-5 ECO Operating Manual preview
B22W-5 ECO
Brand: Fujitsu Pages: 36
Fujitsu B19-7 LED Operating Manual preview
B19-7 LED
Brand: Fujitsu Pages: 40

Brands by name

Popular brands

Load more brands