Epson 6110i - PowerLite XGA LCD Projector, User Manual

Page: 39 / 130

Projecting
39
Shutting Down the Projector
When you’re finished using the projector, follow the steps below to
shut it down. This extends the life of the lamp and protects the
projector from possible overheating.
1. Turn off and disconnect any equipment plugged into the
projector.
2. To turn off the projector, press the
P Power
button twice.
3. When the
P
Power light is steady orange, you can unplug the
projector.
With Epson’s exclusive Instant Off
®
technology, there’s no
cool-down period. When you’re done, just unplug the projector
and it’s ready to travel.
note
When the projector has not
received any input signals
for 30 minutes, it
automatically turns off the
projector lamp and enters
“sleep mode.” This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the
P
Power
button.
If you are done using the
projector, unplug the power
cord. To turn off sleep mode,
see page 61.
Turn off this product when
not in use to prolong the life
of the projector.
Power button
caution
To avoid damaging the
projector or lamp, never
unplug the power cord when
the
P
Power light is green
or flashing orange.