Epson 6100i - PowerLite XGA LCD Projector, User Manual

Page: 101 / 132

Solving Problems
101
Viewing Lamp Usage and Other Information
Use the About menu to view information about the image source, the
display settings of your computer, and the number of hours the lamp
and filter has been used.
Press the
Menu
button, select
Info
, then press
Enter
.
You see the lamp and air filter usage hours and various input signal
settings on the right:
The lamp typically lasts from 2500 to 3000 hours, depending on the
selected Brightness Control setting (see page 57). If the number
shown is close to that, make sure you have a spare lamp handy. If
you’ve installed a new lamp, be sure to reset the lamp timer (see
page 95).
note
The information displayed
depends on the input signal
currently selected.
Lamp usage
Filter usage