manualshive.com logo in svg

Epson 30000 - GT - Flatbed Scanner, User Manual

Share
Download
Epson 30000 - GT - Flatbed Scanner User Manual Download Page 71

Network Scanning

65

Setting Up the Scanner Server

You can set up any Windows Me, Windows 2000, Windows 98, Windows 95, or 
Windows NT 4.0 computer as a scanner server, as long as it has a network interface 
card installed and is running the TCP/IP protocol.

Before you begin, make sure the scanner is unlocked and connected to the scanner 
server (see Chapter 1, “Setting Up Your Scanner” for details). If you don’t have the 
TCP/IP protocol installed on the scanner server, see Appendix A, “Installing the 
TCP/IP Protocol.”

Follow the instructions for your operating system:

■

If you’re running Windows Me, continue with the next section.

■

If you’re running Windows 2000, go to page 71.

■

If you’re running Windows 98, go to page 76. 

■

If you’re running Windows 95, go to page 83.

■

If you’re running Windows NT, go to page 88.

Summary of Contents for 30000 - GT - Flatbed Scanner





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands