56
❏
Perform a print head cleaning; then print a few lines to check
the output.
Printer prints out illegible type or characters
❏
StylusRIP Professional can only to print to a file. In the printer
driver, check that StylusRIP Professional is set to file and not
to an LPT port.
Wrong fonts or jagged type
❏
Most fonts are downloaded with the print job. Sometimes a
bitmap image of a font is downloaded. If the page is missing
a font, StylusRIP Professional will default to the Courier font
or print the bitmap image of the font. Make sure you have the
printer fonts installed properly.
❏
If you have the correct printer fonts, try cleaning the print
head.
StylusRIP Professional takes a long time before printing
starts
❏
Change to a faster CPU or add more RAM. Complex jobs that
use a large number of fonts will process faster on a faster CPU
or with more RAM. We recommends that you change to a
faster CPU first, then add more RAM, if necessary.
EPS files do not print
❏
EPS files are designed to be placed into other documents.
They cannot be processed directly by StylusRIP Professional.
Place EPS files on a page created in another application and
then print from that application.
