Epson 2200 Lumens, Printer Basics Manual

Page: 86 / 106

80
Solving Problems
Paper Problems
Paper doesn’t eject fully or is
wrinkled.
■
If the paper doesn’t eject fully,
you may have set the wrong
paper size. Press the
m paper
button to eject the paper, then
select the correct paper size.
■
If it’s wrinkled when it ejects,
the paper may be damp or too
thin. Load new paper.
Paper sheets don’t feed correctly
or jam in the printer.
■
If paper doesn’t feed or multiple
pages feed, remove it from the
sheet feeder. Fan the edges of
the sheets, reload them against
the right side of the feeder, and
slide the left edge guide against
the paper, but not too tightly.
Don’t load paper above the
arrow on the left edge guide.
■
If paper jams, press the m paper
button. If necessary, open the
cover and remove any jammed
or torn pieces. Load new paper
and press the
m paper button.
Thick paper doesn’t feed correctly
or jams in the printer.
Carefully follow the steps on
page 17 to use the manual feed slot.
Roll paper doesn’t feed correctly
or jams in the printer.
■
Cut the end of the paper
straight across. If it’s cut
diagonally, the paper won’t feed
smoothly.
■
If the roll paper end is curled,
place the end inside a folded
sheet of paper and roll it
backwards against the curl.
■
Make sure the paper is loaded in
the roll paper feeder, not the
sheet feeder; see page 12.
■
As you load the paper, gently
hold it in the roll paper feeder
and press the
z
roll paper
button; don’t force the paper in.
■
Select
Roll
as the Source
(Windows),
Roll Paper
as the
Paper Source (Mac 8.6 to 9.x),
or
Stylus Photo 2200(Roll
Paper)
as the Format for and
Printer option (Mac OS X).
Other settings will feed too
much paper.
■
If extra paper feeds, press the
z
roll paper button for three
seconds to rewind the paper all
the way (repeat if necessary). If
the
m
paper light is on, press the
m
paper button. Reload the
paper as described on page 12.