Epson 1700C - PowerLite XGA LCD Projector Page 60 User Manual Download

Page: 60 / 102

Maintaining the Projector

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a canister of compressed air to remove dust.

To remove dirt or smears on the lens, use lens-cleaning tissue. If
necessary, moisten a soft cloth with lens cleaner and gently wipe the
lens.

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power
cord.

■

To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.

■

To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.

caution

Do not use wax, alcohol,
benzene, paint thinner, or
other chemical detergents.
These can damage the case.

Summary of Contents for 1700C - PowerLite XGA LCD Projector







































































































Search results

Summary of Contents for 1700C - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1700C - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 1700C - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 1700C - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1700C - PowerLite XGA LCD Projector

Brands by name

Popular brands