Epson 1680 - Expression Special Edition, User Manual

Page: 63 / 159

56
How To Scan
Step-by-Step Scanning Instructions
This section contains step-by-step instructions for scanning an image. Although the
Windows interface is shown, Macintosh steps are the same.
Placing Your Original Document
1. Raise the scanner cover and place your document face down on the document
table. If you’re scanning a transparency, the optional transparency unit should be
installed. (See “Installing the Transparency Unit” on page 97.)
If you have the Professional or Professional FireWire model of the EPSON
Expression 1680, the transparency unit came with your scanner. If you
have the Artist or Special Edition models, you can order the transparency
unit.
2. Position the document so the
horizontal and vertical edges are
carefully aligned with the scales
along the sides of the document
table.
3. Close the document cover slowly.
Be careful not to move the
document.
You can remove the document cover if you need to scan a thick item—
such as a photo in an album—that doesn’t fit under the cover. Simply lift
the back of the cover straight up. When you reattach the cover, line the
rods up with the positioning holes and lower the cover into place.
top corner of
document
1680.book Page 56 Thursday, March 1, 2001 4:28 PM